Five-digit LCD, .5" Character Height with decimal
points for .xxx, .xx, and .x
Input Power:
+4 to +28VDC at 150 Micro Amps typical, 300
Micro Amps Maximum. Internally regulated.
Operating Temperature:
-20° C to +60° C.
Storage Temperature:
-40° C to +85° C.
Environment Integrity:
Die-cast metal front panel meets NEMA 4 requirements when panel mounted using gasket provided.
Weight:
5.5 oz. (156 grams)
Signal Inputs:
High speed input: 50 microsecond minimum pulse width.
Low speed input: 12 millisecond minimum pulse width.
Signal input for low speed input is normally pulled up to +3.6V and requires pull down to less than 1v for unit to count. Low Speed input should be used with relay input to reduce contact bounce problems. The high speed input would be used with TTL, CMOS, open collector NPN transistor or magnetic sensor. External pull up required for open collector transistor. Maximum signal input: +28VDC
Time Base Accuracy:
± .01% ± 1 count
Temperature Effects:
± 200 ppm/degree C.
Gate Time:
Programmable from .001 sec to 9.999 seconds in 1 millisecond steps.
Programmable Divider:
1 to 9999 in unit steps.
Programmable Multiplier:
1 to 9999 in unit steps.
Connector:
Integral plug. Mating connector provided with 6" wires
and wire nuts.
