MODEL 9400/9400A

DUAL INPUT VOLTMETER
Models
Options
Features
Model 9400/9400A
Specifications
Case size: "D"


MODELRANGEINPUTPRICE
9400± 1000 to ± 30000 See range programming $449.00
9400A± 1000 to ± 30000 See range programming$334.00

Prices subject to change without notice.
Top of page

OPTIONSDESCRIPTIONPRICE
  • 01
RS232 Compatible Interface $60.00
  • 02
RS485 Compatible Interface $60.00
  • 05
5VDC input power. 500mA max. $135.00
  • 08
4-20mA output max load 600 ohms $60.00
  • 09
Analog output, (0-10VDC) tracks input $60.00
  • 10
10VDC±1% excitation @ 50mA (9400A only)$90.00
  • 11
24VDC±10% excitation @ 50mA (9400A only)$60.00
  • 12
9-18VDC power 400mA max$135.00
  • 15
± 15VDC excitation @ ± 15mA$90.00
  • 20
Rate/Totalizer (9400A only) $90.00
  • 22
230VAC; 50-400hz input power. $15.00
  • 24
18-36VDC power 300mA max $135.00
  • 50
Sunlight readable red LED$40.00
Prices subject to change without notice.
Top of page


FEATURES

  • 16 bit A/D converter
  • NEMA 4 rated bezel with panel gasket seal
  • Heavy duty aluminum case
  • Programming and calibration from four front panel switches
  • Optional analog output 4-20mA or 0 to 10VDC
  • 5 digits, .56" red LED readout with negative indications
  • Two setpoints with relay closures
  • Digital front panel zero of 50% of Span
  • Short case, only 4" behind the panel depth
  • Optional RS232 or RS485 interface
  • Microprocessor based system
  • Dual inputs with programmable math functions
  • Easily programmed span, 1000 to 30,000 counts
  • Programmable ranges ±200mV to ±200V and 4-20mA.
  • Rate/Totalize from 0-5V, 1-5V, or 4-20mA input (optional)
meter 9400
MODEL 9400/9400A
Top of page

SERIES 9400/9400A
The 9400/9400A is a new generation short depth 1/8 DIN package, microprocessor based digital readout that is easily programmable via the four front panel switches. Zero offset of up to 50% of span is easily accomplished using a single front panel pushbutton. Engineering units scaling is done using a microprocessor and the sixteen bit analog to digital converter. The unit will accept two voltage inputs simultaneously and perform math functions on the two inputs with alarm relay outputs. Available math functions are A ­ B, A + B, A x B, A ÷ B, and y=mx+B.

Optional analog outputs of 0-10 VDC or 4-20mA are available and the high and low points of these outputs can be programmed via the front panel switches or even inverted, i.e.: 20-4mA instead of 4-20mA. Peak and valley detect with memory and reset are standard on the unit. RS232 and 485 interface options are available to interface to computers, PLC's or printers. Bezel and scratch resistant lens are sealed to meet the requirements of NEMA 4 and supplied with gasket to seal unit to panel.

Top of page

SPECIFICATIONS
power requirements:
Accuracy:
Display:
Limit Outputs:
Environmental:
Dimensions:
Analog to Digital Conversion:
Limit Outputs:
Analog Output: (optional)
Serial Interface: (optional)
Range Programming:
Top of page

CASE SIZE: "D"