MODEL 9100
The Model 9100 is a six-digit slave display for use with computers, PLCs, DCI panel meters or other instruments producing a serial ASCII output. Interfaces to the 9100 can be standard RS-232 or RS-485. The display has 0.56 inch high, seven segment LED digits separated by decimal points: 8.8.8.8.8.8 and can display any combination of numbers, spaces and several alpha characters. The unit also has addressing capability allowing it to be connected with several other units and be selected individually with RS232 or RS485 interface. Six digits can be displayed and can be set to left or right justify the input string to show just the first or last six digits of the input string. The end of string can be one single character or a set of two characters which can be a Carriage Return , Line Feed , ASCII character, or a combination of a Carriage Return and a Line Feed in any order or two of either. The 9100 uses a data format of 8 data bits, 1 stop bit, and no parity, at the available baud rates of 75, 150, 300, 600, 1200, 2400, 4800, and 9600.